If you have performed a TP-Link repeater setup at your home to enjoy a seamless internet, then it is your duty to take care of it. And, you can ensure the healthy life of your wireless range repeater by updating its firmware timely.
Performing TP-Link repeater firmware update will not only optimize the repeater’s functionality but also protect it from security threats. The list of advantages of updating the repeater’s firmware doesn’t end here. It also adds new features and fixes bugs and errors. All in all, the TP-Link repeater firmware update will gift a good health to your WiFi device.
If you have no idea how to upgrade the repeater firmware then you are in the right place. Here, we will discuss all the hacks related to the TP-Link repeater’s firmware update. So, without any delay, let’s head towards the guide to perform the TP-Link repeater firmware update.
Steps to Perform TP-Link Repeater Firmware Update
The latest firmware version for your TP-Link repeater can be updated by accessing the tplinkrepeater.netpage. Now, go through the below-mentioned instructions and perform the TP-Link firmware update:
- Turn On Your TP-Link Repeater
First of all, you need to power up your TP-Link wireless repeater. Therefore, look for a working wall outlet in your home and plug your TP-Link repeater into it. Switch on the Power button. Do not move to the next step until the power LED on your WiFi device turns green.
- Connect Your Repeater and Router
After your repeater is powered up properly, it is time to make a connection between your TP-Link repeater and router. You can connect both your WiFi devices either wirelessly or using an Ethernet cable. But, connecting them via an Ethernet cable will make the connection more stable. So, go for a wired connection. Keep in mind that it should be finger-tight.
- Switch On Your PC
Once your repeater and the router are connected properly, turn on your computer. Open any web browser like Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Internet Explorer, Opera, etc, and head toward its address bar. Once there, type tplinkrepeater.net in it. Press the Enter key.
But, make sure that your web browser is updated. Also, to avoid any inconvenience in the TP-Link firmware update process, clear the browsing history, cookies, and cache from your web browser.
- Log in to Your TP-Link Repeater
Hitting Enter will redirect you to the TP-Link repeater login page. Now, to log in to your WiFi device, enter the default username and password in the required fields. Bear in mind that the default login details are case-sensitive and even a little mistake is unacceptable. So, we recommend you type them carefully. Also, turn the Caps Lock key on your keyboard off while typing the default login credentials.
Click the Log In button after entering the default username and password of your TP-Link repeater.
Note: If you have changed your repeater’s login details in the past, it is advised to use the changed username and password. Otherwise, you will see a message saying ‘incorrect login details’.
- Update Your Repeater’s Firmware
Hitting Log In will redirect you to the TP-Link repeater setup wizard. Now, head over to the Settings menu and look for the Firmware Update option. Thereafter, click the Check option to see if there is a new firmware available for your repeater. If it is, then follow the on-screen prompts and perform a TP-Link repeater firmware update. Do not refresh your web browser or turn off your repeater while updating firmware as it may corrupt your repeater’s firmware.
In this way, you can perform a TP-Link repeater firmware update. After performing a firmware update, your device will reboot automatically. Once done, connect your WiFi-enabled devices to your repeater’s network and enjoy the internet.
In the Nutshell
That’s it! This was all about how to update your TP-Link repeater’s firmware via tplinkrepeater.net. We hope that you’ll be able to do so and enhance your repeater’s performance. If you found this write-up helpful, then don’t forget to leave a word of appreciation in the comment section. Thank you for reading the post.