When you want to make the changes to the settings of your router, you need to log in and reach its admin panel. The same admin panel is accessed when you want to complete the setup of your router. You can use the default IP address 192.168.1.1 to access the login page. In case you are facing issues and can not log in then neither will you be able to set up your router nor will you be able to make changes to its settings. Thus we have penned down this article to help you fix the login issue with your router. You can follow the hacks mentioned here and log in to the router in a matter of minutes.
How to Fix Router Login Issues?
Here is what you need to do to fix the login issues with your router:
- Check the IP Address
Before anything else, have a look at the IP address that you are using to log in to your router. There is a possibility that you are using the wrong IP address or making typing mistakes while entering it in the address field. We hence, suggest you to make a check if the IP address is the right one. Apart from that cross-check the entrée field once before hitting the Enter key on the keyboard.
- Update the Browser
Using an outdated web browser to log in to the router might cause issues. Looks like you have become a victim of the same thing. Why don’t you try using an updated internet browser now? In the event of the unavailability of an updated browser, consider updating the one that you have.
- Clean Cache from Browser
Updating the browser did not help? Go ahead and clean it now. Delete the cache, cookies as well as browsing history from it by going to its settings. The accumulated junk files may stop some web pages from opening up. Getting it cleaned up will be helpful.
- Verify Power Supply
For the router to work properly, it is essential to be receiving a consistent power supply. Fluctuating power supply can interrupt its signals which is why you can not access the login page using the IP address. Verify the same by examining the power cable and the power socket.
- Check Internet Connection
See if the router is properly connected to the modem or not. A shaky internet connection could be the reason why you are stuck with login issues. If it is an ethernet connection then verify the cable connecting the two devices. It must be damage free and should be tightly fitted into the right ports on the devices.
In case it is a wireless connection, then the distance between the two devices should not exceed. The router must sit within the range of the modem’s network.
- Connect the PC to Right Network
The computer or laptop that you are using to log in to the router must be connected to the router’s network. Probably this is where you are making the mistake. Make sure that your PC is not connected to some other SSID available. If the router’s network name is not available in the list of available networks, then connect it to your PC using an Ethernet connection.
- Reboot the Router
Some possible software glitches could be hindering the login process of the router. Try rebooting your router and rid it of the technical hiccups. To reboot, power off the router after disconnecting it from the modem. You need to remove the power cable from the wall socket. After waiting for some time, connect the router and modem and turn on the router.
- Reset the Router
When nothing works, all you need to do is reset the router to factory settings. This will erase the current settings from it. Once it is done, you need to set it up again from scratch. You need to use the IP address to log in and complete the setup process. Do not make any typos like entering 192.168.10.1 or 192 168 1 1 while logging in.
The Closing Note
This is all about how to fix the IP address not working issue to log in to the router. We are sure now you will be able to log in to your router and customize its settings as per your requirements.