For all those who have setup WiFi extender belonging to the brand Netgear need to update the firmware once the configuration process ends. This will ensure that one gets access to the latest security features. Apart from this, one will also get to experience an enhanced performance of the Netgear extender.
In case, you are one of those users who are in the search of the perfect article to help you to update the firmware of your Netgear extender, then this is the right place for you. Here, we have explained in detail how you can update the firmware of your networking device to its latest version within minutes. Read on.
Steps to Perform Netgear Extender Firmware Update
For your information, depending on the Netgear extender model that you own, the firmware update process will vary. Worry not. The process will differ by just a few steps. As you will read further, you will understand better what we are talking about.
Method 1
- Connect the extender to the host router with aid of a cable.
- Thereafter, connect the computer to the extender’s network.
- Open an updated internet browser and access Netgear Support.
- Enter the Model Number or Product Name of your range extender.
- Click the Downloads button and select the firmware version.
- Select Download and then unzip the file that you downloaded.
- Open a new tab and enter mywifiext.net in the URL bar.
- Pressing the Enter key will take you to the login page.
- Enter the admin password to access the Status page.
- For your information, the admin details are case-sensitive.
- Click Firmware Update > Browser > Upload.
The Netgear extender firmware update process will take approximately 2 minutes in order to get completed.
Method 2
- Launch a web browser on your laptop or computer.
- Log in to the extender using the user name and password.
- When your browser will make the Menu icon appear, click it.
- The extender menu will come into view.
- Click the Settings button and then Firmware Update.
- In case you do not see this option, select Maintenance > Firmware Update.
- Click the Check Online or Check option.
- In case a new firmware is available, it is recommended that you follow the prompts.
In this manner, you will be able to update the firmware of your Netgear wireless range extender to its latest version. By any chance, if you are not able to, then you can reset your networking device. For that, you need to follow the steps given in the next section.
How to Reset Netgear WiFi Extender?
First of all, make sure that your networking device is properly connected to the socket.
- Once assured, locate the Reset button on the wireless range extender.
- You will either find the button at the bottom of the extender or in one of the corners.
- As soon as you find it, press it carefully using an oil pin or paper clip.
- Do this for approximately 30 seconds.
- Once your wireless range extender resets, it will start rebooting.
It is highly recommended that you do not interrupt the process by unplugging your extender from its wall socket or turning it off. Trust us, this will turn out to be fatal for you or else.
Considering after resetting the extender will make it go back to its default factory mode, the time has come for you to set it up again. There are three ways in which you can configure your device: WPS method, manual method, or Nighthawk app.
If you want to learn how to setup a WiFi extender using any of these three methods, then it is suggested that you refer to the instructions given in the user manual of your networking device which you got at the time of purchase.
The Bottom Line
Here ends the post on how to update the firmware of your Netgear wireless range extender. Hopefully, after reading the steps given above, you will be able to enjoy an enhance performance of your networking device. If you do, do not forget to share your feedback via the comment section.