Setting up Wavlink extender to make the most of the performance offered by an existing WiFi router is not a new thing. In light of the same fact, a large proportion of globe has done Wavlink WiFi extender setup. But, not all of them have been able to extract the best performance from the extender. They state that their Wavlink extender keeps rebooting. On the off chance, you are among those users; you should address the problem right away because it can further cause some major issue in the future.
Verify the Power Supply First of All
The most common and the obvious reason why a WiFi range extender or any other networking gadget gets stuck in a reboot loop is that it is getting an insufficient power supply. It generally happens because of a damaged socket. Thus, you should spare some time and have a look at the wall socket into which you have plugged your range extender. Is it free of damages? If yes, then verify that the extender is perfectly plugged into the socket.
In case, the wall socket is found damaged, we suggest you connecting it to another but a working wall socket. You can take the help of a UPS in case you reside in an area that suffers power outages so often. However, you can keep reading the article in case the problem is not due to an improper power supply.
Solutions: Wavlink Extender Keeps Rebooting
- Perform a Proper Power Cycle
Are you wondering how a simple power cycling can be a remedy to the reboot loop? Well, it can be! This is because there are high chances that the extender is rebooting because it has not boot up properly. To get the issue resolved, power cycling is needed. Simply, you must disconnect all the devices sharing a connection with your Wavlink extender and power down the range extender. You are now left with the task of powering up the range extender after waiting for 15 minutes. See if your extender is still stuck in a reboot loop. If it is, you are advised to move to the next technique.
- Update the Firmware
At times, users keep on using their range extenders even if their firmware has become outdated. Perhaps, you have also committed the same mistake. You can’t expect your Wavlink device to work well if you yourself are bugging it by making it work on a dated firmware. Therefore, what we suggest you is to upgrade its firmware to the latest stable version. Firmware update has myriad benefits like improving the performance and security of the extender. Thus, access the wifi.wavlink.com URL and install the latest firmware. You just need to ensure that you are installing the latest firmware version on the range extender.
Note: When you are updating the firmware of your Wavlink extender, you must avoid interrupting the process by playing games on the PC or disconnecting the extender from the router. Refreshing of the tab is also not suggested while a firmware update.
The Concluding Thought
Wavlink extender being stuck in a reboot loop is not a big problem. You just need the correct technique to address the problem. Since we’ve attempted to mention all the techniques in this post, we are assuming that you have fixed the problem with their help.
Hundred to one shots, if your Wavlink extender is still stuck in a reboot loop, it is recommended that you relocate it to eradicate WiFi interference. Place it in a well ventilated room ensuring that there are no heavy electrical appliances and reflective surfaces present there. Reset the extender if the issue continues to trouble you. You can do that by pressing the Reset button carefully. However, you will have to set up the extender again after resetting it.